REAR STABILIZER BAR REMOVAL

PROCEDURE


  1. REMOVE REAR STABILIZER LINK ASSEMBLY LH


    1. A01CNLD

      Remove the 2 nuts and 2 cushions and disconnect the rear stabilizer link assembly LH from the rear No. 2 suspension arm assembly LH.

      Tech Tips

      If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.

  2. REMOVE REAR STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. REMOVE REAR NO. 1 STABILIZER BAR BRACKET


    1. A01CQ2J

      Remove the 4 nuts and 2 rear No. 1 stabilizer bar brackets from the suspension member.

  4. REMOVE REAR STABILIZER BAR


    1. Remove the rear stabilizer bar from the rear suspension member.

  5. REMOVE REAR STABILIZER BUSHING


    1. Remove the 2 rear stabilizer bushings from the rear stabilizer bar.