FRONT SHOCK ABSORBER DISPOSAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY LH


    1. A01CMRYC01
      *A w/o AVS
      *B w/ AVS

      Position the front shock absorber assembly so that it is level with the piston rod fully extended. Using a drill, make a hole in the cylinder between A and B shown in the illustration to discharge the gas inside.

      CAUTION:

      Be careful when drilling as shards of metal may fly about. Always use proper safety equipment.

      Note

      The gas is colorless, odorless and non-poisonous.