ABSORBER CONTROL SWITCH INSPECTION

PROCEDURE


  1. INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY (ABSORBER CONTROL SWITCH)


    1. B002ISZC18
      *a

      Component without harness connected

      (Integration Control and Panel Assembly (Absorber Control Switch))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      8 (B) - 1 (GND) Normal position ON Below 10 Ω
      Normal position OFF 10 kΩ or higher
      7 (P) - 1 (GND) SPORT position ON Below 10 Ω
      SPORT position OFF 10 kΩ or higher

      If the result is not as specified, replace the integration control and panel assembly (absorber control switch).