FRONT ACCELERATION SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL ACCELERATION SENSOR


    1. for RH side:


      1. Install the acceleration sensor with the 2 nuts.

        Torque:
        8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

        Note


        • Avoid any impact to the acceleration sensor.

        • Do not drop the acceleration sensor. If it is dropped, replace it with a new one.

      2. Connect the connector to the acceleration sensor.

    2. for LH side:


      1. Install the acceleration sensor with the 2 nuts.

        Torque:
        8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

        Note


        • Avoid any impact to the acceleration sensor.

        • Do not drop the acceleration sensor. If it is dropped, replace it with a new one.

      2. Connect the connector to the acceleration sensor.

  2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  4. INSTALL COWL SIDE TRIM BOARD LH

    Click here

  5. INSTALL DOOR SCUFF PLATE ASSEMBLY LH

    Click here