MULTIPLEX TILT AND TELESCOPIC ECU INSTALLATION

PROCEDURE

1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU

   
   

   1. for LHD:

      
      

      1. Attach the claw and install the multiplex tilt and telescopic ECU to the bracket.

      2. Install the bolt and multiplex tilt and telescopic ECU to the electric power steering column sub-assembly.

      3. Connect the connector and harness clamp.

   2. for RHD:

      
      

      1. Attach the claw and install the multiplex tilt and telescopic ECU to the steering electric power steering column sub-assembly.

      2. Connect the connector to the multiplex tilt and telescopic ECU.

2. INSTALL LOWER STEERING COLUMN COVER

   Click here

3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Click here

4. INSTALL DECK FLOOR BOX LH (w/ Spare Tire)

   Click here

5. INSTALL REAR DECK FLOOR BOX (w/ Spare Tire)

   Click here

6. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Spare Tire)

   Click here

7. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM

   
   

   1. Reset the auto tilt away function setting to the previous condition by changing the customize parameter.

      Click here