SHIFT LEVER DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE SHIFT LEVER CAP


    1. A01CP2LC01
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, detach the 2 claws and remove the shift lever cap from the shift position indicator.

  2. REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY


    1. A01COHX

      Detach the 7 claws and remove the shifting hole cover sub-assembly from the rear upper console panel sub-assembly.

  3. REMOVE SHIFT POSITION INDICATOR


    1. A01CPCM

      Remove the 2 screws and shift position indicator from the rear upper console panel sub-assembly.