MOTOR WATER JACKET COVER ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

  2. DRAIN COOLANT (for Inverter Coolant)

    Click here

  3. REMOVE NO. 2 MOTOR WATER JACKET COVER ASSEMBLY


    1. A01COEL

      Remove the 5 bolts.

    2. Insert the blade of an oil pan seal cutter between the transaxle housing. Cut through the applied sealer and remove the No. 2 motor water jacket cover assembly.

      Note

      Be careful not to damage the contact surfaces of the transaxle housing where the No. 2 motor water jacket cover assembly is installed.

  4. REMOVE HYBRID VEHICLE TRANSAXLE ASSEMBLY

    Click here

  5. REMOVE FRONT ENGINE MOUNTING BRACKET

    Click here

  6. REMOVE NO. 1 TRANSMISSION CONTROL CABLE BRACKET

    Click here

  7. REMOVE OIL COOLER TUBE CLAMP

    Click here

  8. REMOVE NO. 2 AUTOMATIC TRANSMISSION CASE COVER

    Click here

  9. REMOVE NO. 1 MOTOR WATER JACKET COVER ASSEMBLY


    1. A01CPA8

      Remove the 8 bolts.

    2. Insert the blade of an oil pan seal cutter between the transaxle housing. Cut through the applied sealer and remove the No. 1 motor water jacket cover assembly.

      Note

      Be careful not to damage the contact surfaces of the transaxle housing where the No. 1 motor water jacket cover assembly is installed.

  10. REMOVE NO. 3 MOTOR WATER JACKET COVER ASSEMBLY


    1. A01CR5P

      Remove the 12 bolts.

    2. Insert the blade of an oil pan seal cutter between the transaxle housing. Cut through the applied sealer and remove the No. 3 motor water jacket cover assembly.

      Note

      Be careful not to damage the contact surfaces of the transaxle housing where the No. 3 motor water jacket cover assembly is installed.