COMBINATION SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. B002I41N01

      Install the integration control and panel assembly to the rear upper console panel sub-assembly with the 2 screws.

      Tech Tips

      The locations labeled A in the illustration are tightened together with the shift position indicator.

  2. INSTALL SHIFT POSITION INDICATOR

    Click here

  3. INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

    Click here

  4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    Click here

  6. INSTALL NO. 2 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  7. INSTALL NO. 1 SWITCH HOLE BASE

    Click here

  8. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  9. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  10. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  11. INSTALL INSTRUMENT SIDE PANEL LH

    Click here

  12. INSTALL INSTRUMENT SIDE PANEL RH

    Click here

  13. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH

    Click here

  14. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH

    Click here

  15. INSTALL UPPER REAR CONSOLE PANEL

    Click here

  16. INSTALL CONSOLE ARMREST ASSEMBLY

    Click here

  17. INSTALL MULTI-DISPLAY ASSEMBLY WITH BRACKET

    Click here

  18. INSTALL INSTRUMENT PANEL FINISH PLATE