CRUISE CONTROL MAIN SWITCH INSTALLATION

PROCEDURE


  1. INSTALL CRUISE CONTROL MAIN SWITCH


    1. B002H5KC02
      *1 Wire Harness
      *a Rib
      *b Guide
      B002I10 Connector
      B002HVY Screw

      Pass the wire harness under the rib as shown in the illustration.

    2. Attach the guide.

    3. Temporarily install the cruise control main switch with the 2 screws.

    4. Tighten the 2 screws to install the cruise control main switch.

      Tech Tips

      Tighten the screws in the order shown in the illustration.

      Torque:
      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }

    5. Connect the connector.

  2. INSTALL HORN BUTTON ASSEMBLY

    Click here