LANE DEPARTURE ALERT SYSTEM(w/ Steering Control) FAIL-SAFE CHART


  1. CONDITIONS FOR MOMENTARY STOP


    1. A01CRGMC02
      *1 Lane Departure Alert Indicator
      *2 Multi-information Display

      When control is stopped momentarily, "Lane Departure Alert Unavailable Camera Overheated" is displayed in the combination meter assembly, the lane departure alert indicator turns off. This occurs under the following condition:


      • A high lane departure warning camera temperature is detected.

      Tech Tips

      Turn the lane departure alert system (w/ Steering Control) off momentarily and check that the temperature of the camera decreases. Then restart the system.

    2. A01CR0QC01
      *1 Lane Departure Alert Indicator
      *2 Multi-information Display

      When a system malfunction is detected, the master warning light illuminates together at the same time a "pong" sound is heard, and "LDA Steering Assist Deactivated Warnings Available" is displayed on the multi-information display in the combination meter assembly. In this case, check the DTC and follow the inspection procedure to perform repairs.

      Tech Tips


      • When the steering pad switch assembly (lane departure alert main switch) is turned on and while steering support "ON" is selected, a warning sounds and the master warning light and the multi-information display turn on. Even though the display may temporarily turn off, it will turn on again when the system is malfunctioning and the steering pad switch assembly (lane departure alert main switch) is turned on or off.

      • When the power switch is on (IG) and does not turn on (READY), the steering pad switch assembly (lane departure alert main switch) is turned on, and steering assist "ON" is selected, "LDA Steering Assist Deactivated Warnings Available" is displayed. Therefore, check only when "LDA Steering Assist Deactivated Warnings Available" is displayed even during a READY ON state.

  2. STOP DUE TO SYSTEM MALFUNCTION


    1. A01CPIYC02
      *1 Lane Departure Alert Indicator
      *2 Multi-information Display

      When a system malfunction is detected, the lane departure alert indicator turns off, "Lane Departure Alert Malfunction Visit Your Dealer" is displayed in the combination meter assembly.

      Tech Tips

      After the power switch is turned off then back on (IG), the lane departure alert system operates again if the system is confirmed to be normal when the lane departure alert main switch is turned on.