LANE DEPARTURE ALERT SYSTEM FREEZE FRAME DATA


  1. CHECK FREEZE FRAME DATA


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Chassis / Lane Departure Alert / Trouble Codes.


      Chassis > Lane Departure Alert > Trouble Codes

    5. According to the GTS display, select a DTC that stored freeze frame data.

    6. Read the freeze frame data recorded when the DTC was stored.


      Chassis > Lane Departure Alert
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      LDA Control Status of the LDA control Prohibit or Permit

      Prohibit: Control prohibited

      Permit: Control permitted

      		 -
      Head Light (High Beam) Status of the headlight (high beam) OFF or ON

      ON: Headlight dimmer switch HI

      OFF: Headlight dimmer switch except HI

      		 -
      Turn Signal Switch (Right) Status of turn signal light switch (right) OFF or ON

      ON: Turn signal light switch on (right)

      OFF: Turn signal light switch off

      		 -
      Turn Signal Switch (Left) Status of turn signal light switch (left) OFF or ON

      ON: Turn signal light switch on (left)

      OFF: Turn signal light switch off

      		 -
      Destination Information Status of the country JPN, NA, EURO, CHINA or OTHER Actual country code -
      LDA Indicator Status of the lane departure alert indicator Nothing or Green

      Nothing: Lane departure alert indicator is not illuminated

      Green: Lane departure alert indicator is illuminated

      		 -
      Left Lane Indicator Status of left lane indicator Nothing, Heavy, Thin or H blink

      Nothing: Lane departure alert system deactivated

      Heavy: Left lane detected

      Thin: Left lane not detected

      H blink: Departing from left lane

      		 -
      Right Lane Indicator Status of right lane indicator Nothing, Heavy, Thin or H blink

      Nothing: Lane departure alert system deactivated

      Heavy: Right lane detected

      Thin: Right lane not detected

      H blink: Departing from right lane

      		 -
      Skid Control Buzzer Demand Status of combination meter assembly demand OFF or ON

      ON: Combination meter assembly sounds (lane departure warning is being issued)

      OFF: Combination meter assembly does not sound (lane departure warning is not being issued)

      		 -
      Vehicle Information (2WD/4WD) Vehicle information 2WD, 4WD or Unknown

      2WD: for 2WD

      4WD: for AWD

      Unknown: Vehicle information not confirmed

      		 -
      Vehicle Information (Conv/HV) Vehicle information Conv, HV or Unknown

      Conv: Conventional

      HV: Hybrid vehicle

      Unknown: Vehicle information not confirmed

      		 -
      The Number of DTCs Number of DTCs Min.: 0, Max.: 255 Actual number of DTCs -