FORWARD RECOGNITION CAMERA SYSTEM, Diagnostic DTC:U0101, U0123, U0129, U0142, U0182, U0293

DTC Code DTC Name
U0101 Lost Communication with TCM
U0123 Lost Communication with Yaw Rate Sensor Module
U0129 Lost Communication with Brake System Control Module
U0142 Lost Communication with Body Control Module "B"
U0182 Lost Communication with AFS ECU
U0293 Lost Communication with HV ECU

DESCRIPTION

When a malfunction is detected between various ECUs and sensors, these DTCs are stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
U0101 Lost Communication with TCM While the vehicle is being driven at 1 km/h or 1 mph or more, a communication error between the TCM (hybrid vehicle control ECU assembly) and the forward recognition camera is detected for approximately 5 seconds or more.

  • CAN communication system

  • TCM (Hybrid vehicle control ECU assembly)

  • Forward recognition camera
U0123 Lost Communication with Yaw Rate Sensor Module While the vehicle is being driven at 1 km/h or 1 mph or more, a communication error between the yaw rate sensor and the forward recognition camera is detected for approximately 5 seconds or more.

  • CAN communication system

  • Yaw rate sensor

  • Forward recognition camera
U0129 Lost Communication with Brake System Control Module 2 seconds after the power switch is turned on (IG), a communication error between the skid control ECU assembly and the forward recognition camera is detected for approximately 5 seconds or more.

  • CAN communication system

  • Skid control ECU assembly

  • Forward recognition camera
U0142 Lost Communication with Body Control Module "B" 2 seconds after the power switch is turned on (IG), a communication error between the main body ECU (multiplex network body ECU) and the forward recognition camera is detected for approximately 5 seconds or more.

  • CAN communication system

  • Main body ECU (Multiplex network body ECU)

  • Forward recognition camera
U0182 Lost Communication with AFS ECU 2 seconds after the power switch is turned on (IG), a communication error between the headlight light control ECU sub-assembly and the forward recognition camera is detected for approximately 5 seconds or more.

  • CAN communication system

  • Headlight light control ECU sub-assembly LH

  • Headlight light control ECU sub-assembly RH

  • Forward recognition camera
U0293 Lost Communication with HV ECU 2 seconds after the power switch is turned on (IG), a communication error between the hybrid vehicle control ECU assembly and the forward recognition camera is detected for approximately 5 seconds.

  • CAN communication system

  • Hybrid vehicle control ECU assembly

  • Forward recognition camera

PROCEDURE


  1. CHECK FOR DTCs (FORWARD RECOGNITION CAMERA SYSTEM)


    1. Clear the DTCs.

      Click here


      Chassis > Front Recognition Camera > Clear DTCs

    2. Perform the following procedure.

      Tech Tips

      If the conditions are not met, the system cannot detect the malfunction.

    3. Check for DTCs.

      Click here


      Chassis > Front Recognition Camera > Trouble Codes
      Result
      Result Proceed to
      DTC U0101, U0123, U0129, U0142 and U0293 are not output A
      DTC U0101, U0123, U0129, U0142 or U0293 is output B

    A

    USE SIMULATION METHOD TO CHECK Click here

    B

    GO TO CAN COMMUNICATION SYSTEM Click here