DYNAMIC RADAR CRUISE CONTROL SYSTEM, Diagnostic DTC:P1631

DTC Code DTC Name
P1631 Communication Error from HV ECU to VSC

DESCRIPTION

The hybrid vehicle control ECU sends signals such as A/T information signals, dynamic radar cruise control operation signals, brake operation demand signals, and buzzer operation demand signals to the skid control ECU (brake booster with master cylinder assembly) when the dynamic radar cruise control is operating. Therefore, if the skid control ECU (brake booster with master cylinder assembly) detects a communication error with the hybrid vehicle control ECU, it sends a malfunction signal back to the hybrid vehicle control ECU.

DTC No. Detection Item DTC Detection Condition Trouble Area
P1631 Communication Error from HV ECU to VSC

w/o Full-speed range following function:


  • While the vehicle speed is 36 km/h (22 mph) or more and the dynamic radar cruise control system is operating, the hybrid vehicle control ECU continuously receives a logical error signal from the skid control ECU (brake booster with master cylinder assembly) for approximately 1 second or more.

w/ Full-speed Range Following Function:


  • While the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating, the hybrid vehicle control ECU continuously receives a logical error signal from the skid control ECU (brake booster with master cylinder assembly) for approximately 1 second or more.

  • CAN communication system

  • Skid control ECU (brake booster with master cylinder assembly)

  • Hybrid vehicle control ECU

CAUTION / NOTICE / HINT

Note


  • Before replacing the hybrid vehicle control ECU, refer to Service Bulletin.

  • First check the CAN communication system by following How to Proceed with Troubleshooting. After checking that there are no malfunctions in the CAN communication system, proceed with troubleshooting.

    Click here

PROCEDURE


  1. CHECK CAN COMMUNICATION SYSTEM


    1. Using the GTS, check if the CAN communication system is functioning normally.

      Click here

      Result
      Result Proceed to
      CAN communication system DTCs are not output A
      CAN communication system DTCs are output B

    B

    GO TO CAN COMMUNICATION SYSTEM Click here

    A

  2. CHECK FOR DTCs (RADAR CRUISE 1)


    1. Clear the DTCs.

      Click here


      Powertrain > Radar Cruise1 > Clear DTCs

    2. Make sure that the DTC detection conditions are met.

      Tech Tips

      If the detection conditions are not met, the system cannot detect the malfunction.

    3. Check for DTCs.

      Click here


      Powertrain > Radar Cruise1 > Trouble Codes
      Result
      Result Proceed to
      DTC P1631 is not output A
      DTC P1631 is output B

    A

    USE SIMULATION METHOD TO CHECK Click here

    B

  3. REPLACE HYBRID VEHICLE CONTROL ECU


    1. Replace the hybrid vehicle control ECU with a new one.

      Click here

      Result
      Proceed to
      NEXT

    NEXT

  4. CHECK FOR DTCs (RADAR CRUISE 1)


    1. Clear the DTCs.

      Click here


      Powertrain > Radar Cruise1 > Clear DTCs

    2. Make sure that the DTC detection conditions are met.

      Tech Tips

      If the detection conditions are not met, the system cannot detect the malfunction.

    3. Check for DTCs.

      Click here


      Powertrain > Radar Cruise1 > Trouble Codes
      Result
      Result Proceed to
      DTC P1631 is not output A
      DTC P1631 is output B

    A

    END

    B

    REPLACE SKID CONTROL ECU (BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY) for LHD: Click here
    REPLACE SKID CONTROL ECU (BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY) for RHD: Click here