DYNAMIC RADAR CRUISE CONTROL SYSTEM OPERATION CHECK


  1. INPUT SIGNAL CHECK

    B002ISQC01
    *a ON/OFF
    *b -SET
    *c +RES
    *d CANCEL
    *e MODE

    1. Connect the GTS to the DLC3.

    2. Check the cruise control main switch using the Data List function of the GTS (ON/OFF, -SET, +RES, CANCEL and MODE).

  2. INSPECT MODE SWITCH

    B002HLFC02
    *a ON/OFF
    *b MODE

    1. Turn the power switch on (IG).

    2. Turn the cruise control system on using the cruise control main switch. Then push the cruise control main switch to MODE for 1 second or more to switch to the constant speed control mode.

    3. B002KABC01
      *a

      Cruise Control Indicator

      (Vehicle-to-vehicle distance control mode)
      *b

      Cruise Control Indicator

      (Constant speed control mode)

      Check that the cruise control indicator (vehicle-to-vehicle distance control mode) goes off and the cruise control indicator (constant speed control mode) illuminates.

      Note

      Do not push any other switches before pushing the cruise control main switch to MODE. If another switch is pushed, turn the cruise control system off and repeat the procedure above.

      Tech Tips

      If a malfunction is detected, turn the power switch off and repeat the procedure above.

  3. INSPECT STEERING PAD SWITCH ASSEMBLY


    1. Turn the power switch on (IG).

    2. Turn the cruise control system on using the cruise control main switch.

    3. B002J4IC01
      *A w/o Lane Departure Alert System
      *B w/ Lane Departure Alert System
      *1 Distance Control Switch

      Press the steering pad switch assembly (distance control switch).

    4. Check that the indication of the vehicle-to-vehicle distance, which is shown on the multi-information display in the combination meter assembly changes from long to middle to short in that order.

      B002KZRC01
      *1 Long *2 Middle
      *3 Short - -

      Tech Tips

      Long is automatically selected each time the power switch is on (READY).