OIL PRESSURE SWITCH INSPECTION

PROCEDURE

1. INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY

   
   

   1. Disconnect the engine oil pressure switch assembly connector.

   2. Put the engine in inspection mode (maintenance mode).

      Click here

   3. Start the engine.

   4. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 1 - Body ground Engine stopped Below 1 Ω Engine idling 10 kΩ or higher

      If the result is not as specified, replace the engine oil pressure switch assembly.

   5. Connect the engine oil pressure switch assembly connector.