COOLING FAN MOTOR INSTALLATION

PROCEDURE

1. INSTALL NO. 2 COOLING FAN MOTOR

   
   

   1. Attach the 2 clamps and install the No. 2 cooling fan motor with the 3 screws.

      Torque:

      3.9 N*m  { 40 kgf*cm, 35 in.*lbf }

   2. Install the cooling fan motor insulator to the fan shroud with the 2 screws.

      Torque:

      2.6 N*m  { 27 kgf*cm, 23 in.*lbf }

2. INSTALL COOLING FAN MOTOR

   
   

   1. Attach the clamp and install the cooling fan motor with the 3 screws.

      Torque:

      3.9 N*m  { 40 kgf*cm, 35 in.*lbf }

3. INSTALL NO. 2 FAN

   Note

   Do not switch the fan and No. 2 fan when installing them. Parts may be damaged if the cooling fans are installed in the wrong locations.

   
   

   1. Install the No. 2 fan with the nut.

      Torque:

      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

4. INSTALL FAN

   Note

   Do not switch the fan and No. 2 fan when installing them. Parts may be damaged if the cooling fans are installed in the wrong locations.

   
   

   1. Install the fan with the nut.

      Torque:

      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

5. INSTALL COOLING FAN ECU

   
   

   1. Install the cooling fan ECU with the 2 screws.

      Torque:

      2.6 N*m  { 27 kgf*cm, 23 in.*lbf }

   2. Connect the cooling fan motor connector and No. 2 cooling fan motor connector.

6. INSTALL COOLING FAN WIRE

   
   

   1. Attach the 3 clamps and install the cooling fan wire.

   2. Connect the cooling fan ECU connector.

7. INSTALL FAN SHROUD WITH COOLING FAN

   Click here