THERMOSTAT INSTALLATION

PROCEDURE

1. INSTALL THERMOSTAT

   
   

   1. Install a new gasket to the thermostat.

   2. 

      *a	Jiggle Valve

      Install the thermostat with the jiggle valve facing upward.

      Tech Tips

      The jiggle valve may be set to within 10° on either side of the prescribed position.

2. CONNECT WATER INLET

   
   

   1. Connect the water inlet with the 2 nuts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

3. ADD ENGINE COOLANT

   Click here

4. INSPECT FOR COOLANT LEAK

   Click here