POWER STEERING ECU(for Power Tilt and Power Telescopic Steering Column) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE ELECTRIC POWER STEERING COLUMN SUB-ASSEMBLY

    Click here

  2. REMOVE POWER STEERING ECU ASSEMBLY


    1. for LHD:


      1. A01CRMN

        Detach the claw and remove the power steering ECU protector from the power steering ECU assembly.

      2. A01CPCZC01
        *a Cable Tie
        *b Heat Resistant Tape

        Remove the 2 cable ties and heat resistant tape.

      3. A01COOP

        Disconnect the 3 connectors from the power steering ECU assembly.

      4. Disconnect the 2 harness clamps from the harness bracket.

    2. for RHD:


      1. A01CQIC

        Detach the claw and remove the power steering ECU protector from the power steering ECU assembly.

      2. A01CN8F

        Disconnect the 3 connectors from the power steering ECU assembly.

      3. Disconnect the 2 harness clamps from the harness bracket.

    3. A01COCC

      Remove the 3 bolts and power steering ECU assembly from the electric power steering column sub-assembly.

    4. A01CNLF

      Remove the electric power steering motor shaft spacer from the electric power steering ECU assembly.

    5. A01CQXZ

      Remove the electric power steering motor shaft damper from the power steering ECU assembly.