ELECTRIC PARKING BRAKE ACTUATOR REMOVAL

PROCEDURE


  1. RELEASE PARKING BRAKE


    1. With the power switch on (IG), operate the electric parking brake switch to release the parking brake. Then turn the power switch off.

      Tech Tips

      If the parking brake cannot be released,

      Click here

  2. REMOVE REAR WHEEL

    Click here

  3. REMOVE PARKING BRAKE WIRE ASSEMBLY NO.1


    1. A0001ZN

      Disconnect the connector from the parking brake wire assembly.

    2. A0000RD

      Remove the 4 bolts and disconnect the parking brake wire bracket.

    3. A0002AM

      Disconnect the connector from the parking brake actuator assembly LH.

      Note


      • Remove any dirt or water from around the connector.

      • Do not allow dirt or water inside the connector.

    4. Remove the 2 bolts, nut and parking brake wire assembly.

  4. REMOVE PARKING BRAKE ACTUATOR ASSEMBLY LH


    1. B002IAK

      Using a 5 mm hexagon socket wrench, remove the 2 bolts and parking brake actuator assembly LH.

    2. Remove the O-ring from the rear disc brake cylinder assembly LH.