WATER PUMP WITH MOTOR REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

  2. DRAIN COOLANT (for Inverter Coolant)

    Click here

  3. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY

    Click here

  4. DISCONNECT NO. 2 INVERTER COOLING HOSE ASSEMBLY

    Click here

  5. REMOVE WATER PUMP WITH MOTOR


    1. A01H80G

      Disconnect the water pump with motor connector from the water pump with motor.

      Note

      Wipe off any coolant from around both the connectors of the wire harness and water pump with motor before disconnecting them, and apply vinyl tape to the disconnected connectors to protect them from coolant.

    2. A01H7TD

      Slide the hose clamp, and disconnect the No. 2 inverter cooling hose and No. 3 inverter cooling hose from the water pump with motor.

      Note

      After disconnecting the water hose, plug the pipe with vinyl tape, etc. to prevent foreign matter from entering the water pump with motor.

      Tech Tips

      Prepare a drain pan or cloth in case the coolant leaks.

    3. A01H631

      Remove the 3 bolts and the water pump with motor from the HV water pump bracket sub-assembly.

  6. REMOVE HV WATER PUMP BRACKET SUB-ASSEMBLY


    1. B002K3C

      Remove the 2 bolts and HV water pump bracket sub-assembly from the inverter bracket.