HYBRID CONTROL SYSTEM, Diagnostic DTC:P1606-308, P1606-317

DTC Code DTC Name
P1606-308 Collision has been detected or Collision Sensor Connection (Open)
P1606-317 Collision has been detected or Collision Sensor Connection (Open)

DTC SUMMARY


  1. MALFUNCTION DESCRIPTION

    The hybrid vehicle control ECU and airbag ECU detect that a collision has occurred and shut off the system main relay.

    The cause of this DTC may be one of the following:


    • Collision is detected

    • Detection sensor system malfunction


      • Airbag system malfunction

      • Hybrid vehicle control ECU malfunction

      • Communication malfunction between airbag ECU and hybrid vehicle control ECU

      • Hybrid vehicle control ECU communication malfunction

DESCRIPTION

The hybrid vehicle control ECU receives a signal that indicates a collision from the airbag ECU assembly to detect a collision. After detecting a collision, the hybrid vehicle control ECU shuts off the high voltage systems for safety.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P1606-308 Collision has been detected or Collision Sensor Connection (Open)

Collision detection

A block signal is received from the airbag ECU assembly.

(1 trip detection logic)

  • Airbag ECU assembly

  • Hybrid vehicle control ECU

  • Airbag system

 Does not come on

Master Warning Light:

Comes on
P1606-317 Collision has been detected or Collision Sensor Connection (Open)

Collision detection

Multiple wiring malfunctions occur simultaneously.

(1 trip detection logic)

  • Hybrid vehicle control ECU

  • Airbag system

 Does not come on

Master Warning Light:

Comes on

Tech Tips

If P1606-308 or 317 is output, the hybrid system cannot be started unless the DTCs are cleared using the GTS.

Related Data List
DTC No. Data List
P1606-308

  • Collision Signal (Airbag)

  • Normal Signal for A/B ECU
P1606-317

CAUTION / NOTICE / HINT

Tech Tips

After the repair, clear the DTCs and perform the following procedure to check that DTCs are not output.


  1. Turn the power switch on (IG) and wait for 5 seconds or more.

PROCEDURE


  1. CHECK VEHICLE FOR COLLISION DAMAGE


    1. Check the vehicle condition.

      Result
      Proceed to
      The vehicle is not damaged.
      The vehicle is damaged.

    The vehicle is damaged.

    REPAIR VEHICLE

    The vehicle is not damaged.

  2. CHECK DTC OUTPUT (HYBRID CONTROL)


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

    4. Check for DTCs.


      Powertrain > Hybrid Control > Trouble Codes
      Result
      Proceed to
      P0A1D is output at the same time
      Other than above

    5. Turn the power switch off.


    P0A1D is output at the same time

    GO TO DTC CHART (P0A1D) Click here

    Other than above

  3. CHECK INFORMATION CODE (HYBRID CONTROL)


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

    4. Access the freeze frame data of DTC P1606 and read the INF code.

      Result
      Proceed to
      INF code 308 is output.
      INF code 317 is output.

    5. Turn the power switch off.


    INF code 308 is output.

    CHECK AIRBAG SYSTEM Click here

    INF code 317 is output.

  4. CHECK DTC OUTPUT (HYBRID CONTROL)


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

    4. Check for DTCs.


      Powertrain > Hybrid Control > Trouble Codes
      Result
      Result Proceed to
      P3107-213, P3107-214, U0151-763, U0110-160 or U0110-657 is output at the same time. NEXT

    5. Turn the power switch off.


    NEXT

    GO TO DTC CHART (HYBRID CONTROL SYSTEM) Click here