ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

   Tech Tips

   Perform "Inspection After Repairs" after replacing the engine coolant temperature sensor.

   
   

   • w/ EGR System:

     Click here

   • w/o EGR System:

     Click here

   • w/ Canister Pump Module:

     Click here

   
   
   1. 

      *1	Engine Coolant Temperature Sensor
      *2	Gasket
      *a	Torque Wrench Fulcrum Length
      *b	19 mm Ball Joint Lock Nut Wrench

      Using a 19 mm ball joint lock nut wrench, install a new gasket and engine coolant temperature sensor.

      Torque
      Specified tightening torque
      19.6 N*m (200 kgf*cm, 14 ft.*lbf)

      Tech Tips

      
      

      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

        Click here

      • When using ball joint lock nut wrench (fulcrum length of 150 mm (5.91 in.)) + torque wrench (fulcrum length of 162 mm (6.38 in.)): 10.2 N*m (104 kgf*cm, 8 ft.*lbf)

   2. Connect the 2 ground wires with the 2 bolts.

      Torque:

      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }

   3. Connect the engine coolant temperature sensor connector.

2. ADD ENGINE COOLANT

   Click here

3. INSPECT FOR COOLANT LEAK

   Click here

4. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

   Click here