ENGINE COOLANT TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. DRAIN ENGINE COOLANT

    Click here

  2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  3. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    1. A01CQDY

      Disconnect the engine coolant temperature sensor connector.

    2. Remove the 2 bolts and disconnect the 2 ground wires.

    3. A01CO9CC02
      *1 Engine Coolant Temperature Sensor
      *2 Gasket
      *a 19 mm Ball Joint Lock Nut Wrench

      Using a 19 mm ball joint lock nut wrench, remove the engine coolant temperature sensor and gasket.