ECM REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

    Click here

  2. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Spare Tire)

    Click here

  3. REMOVE REAR DECK FLOOR BOX (w/ Spare Tire)

    Click here

  4. REMOVE DECK FLOOR BOX LH (w/ Spare Tire)

    Click here

  5. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  6. REMOVE AIR CLEANER CAP AND HOSE

    Click here

  7. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY


    1. Remove the air cleaner filter element sub-assembly from the air cleaner case sub-assembly.

  8. REMOVE AIR CLEANER CASE SUB-ASSEMBLY


    1. B002HK4

      Remove the 2 bolts and the air cleaner case sub-assembly.

  9. REMOVE ECM


    1. B002HUA

      Remove the bolt and disconnect the wire harness from the No. 2 ECM bracket.

    2. B002H81

      Disengage the lock, pull down the lever and disconnect the 2 connectors from the ECM.

      Note

      After disconnecting the connectors, make sure that dirt, water or other foreign matter does not contact the connecting parts of the connectors.

    3. B002KTL

      Remove the 3 bolts and ECM.

  10. REMOVE NO. 1 ECM BRACKET


    1. B002J1W

      Remove the 2 screws and the No. 1 ECM bracket from the ECM.

  11. REMOVE NO. 2 ECM BRACKET


    1. B002K5N

      Remove the 2 screws and the No. 2 ECM bracket from the ECM.