EGR VALVE INSPECTION

PROCEDURE


  1. INSPECT EGR VALVE ASSEMBLY


    1. Measure the resistance.


      1. A01CROZC08
        *a

        Component without harness connected

        (EGR Valve Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        5 (+B2) - 4 (EGR1) 20°C (68°F) 18 to 22 Ω
        5 (+B2) - 6 (EGR3)
        2 (+B1) - 1 (EGR4)
        2 (+B1) - 3 (EGR2)

        If the result is not as specified, replace the EGR valve assembly.