WIPER / WASHER SERVICE DATA

FRONT WIPER SWITCH (for LHD, w/o Auto Wiper System)
Connector Condition	Tester Connection	Switch Condition	Specified Condition
Component without harness connected	I125-2 (+B) - I125-3 (+1)	MIST	Below 1 Ω
	I125-3 (+1) - I125-1 (+S)	OFF
	I125-3 (+1) - I125-1 (+S)	INT
	I125-2 (+B) - I125-3 (+1)	LO
	I125-2 (+B) - I125-4 (+2)	HI

FRONT WIPER SWITCH (for LHD, w/ Auto Wiper System)
Connector Condition	Tester Connection	Switch Condition		Specified Condition
Component without harness connected	I125-2 (+B) - I125-3 (+1)	MIST		Below 1 Ω
	I125-3 (+1) - I125-1 (+S)	OFF
	I125-3 (+1) - I125-1 (+S)	AUTO
	I125-8 (AUTO) - I125-9 (E)	AUTO
	I125-2 (+B) - I125-3 (+1)	LO
	I125-2 (+B) - I125-4 (+2)	HI
	I125-6 (VR2) - I125-7 (VR1)	Adjusting Ring	P1	209 to 231 Ω
			P2	114 to 126 Ω
			P3	58.9 to 65.1 Ω
			P4	Below 1 Ω

FRONT WIPER SWITCH (for RHD, for LH Side, w/o Auto Wiper System)
Connector Condition	Tester Connection	Switch Condition	Specified Condition
Component without harness connected	I30-3 (+B) - I30-2 (+1)	MIST	Below 1 Ω
	I30-4 (+S) - I30-2 (+1)	OFF
	I30-4 (+S) - I30-2 (+1)	INT
	I30-3 (+B) - I30-2 (+1)	LO
	I30-3 (+B) - I30-1 (+2)	HI

FRONT WIPER SWITCH (for RHD, for LH Side, w/ Auto Wiper System)
Connector Condition	Tester Connection	Switch Condition		Specified Condition
Component without harness connected	I30-3 (+B) - I30-2 (+1)	MIST		Below 1 Ω
	I30-4 (+S) - I30-2 (+1)	OFF
	I30-4 (+S) - I30-2 (+1)	AUTO
	I30-7 (AUTO) - I30-6 (E)	AUTO
	I30-3 (+B) - I30-2 (+1)	LO
	I30-3 (+B) - I30-1 (+2)	HI
	I30-8 (VR2) - I30-9 (VR1)	Adjusting Ring	P1	209 to 231 Ω
			P2	114 to 126 Ω
			P3	58.9 to 65.1 Ω
			P4	Below 1 Ω

FRONT WIPER SWITCH (for RHD, for RH Side, w/o Auto Wiper System)
Connector Condition	Tester Connection	Switch Condition	Specified Condition
Component without harness connected	I125-2 (+B) - I125-3 (+1)	MIST	Below 1 Ω
	I125-3 (+1) - I125-1 (+S)	OFF
	I125-3 (+1) - I125-1 (+S)	INT
	I125-2 (+B) - I125-3 (+1)	LO
	I125-2 (+B) - I125-4 (+2)	HI

FRONT WIPER SWITCH (for RHD, for RH Side, w/ Auto Wiper System)
Connector Condition	Tester Connection	Switch Condition		Specified Condition
Component without harness connected	I125-2 (+B) - I125-3 (+1)	MIST		Below 1 Ω
	I125-3 (+1) - I125-1 (+S)	OFF
	I125-3 (+1) - I125-1 (+S)	AUTO
	I125-8 (AUTO) - I125-9 (E)	AUTO
	I125-2 (+B) - I125-3 (+1)	LO
	I125-2 (+B) - I125-4 (+2)	HI
	I125-6 (VR2) - I125-7 (VR1)	Adjusting Ring	P1	209 to 231 Ω
			P2	114 to 126 Ω
			P3	58.9 to 65.1 Ω
			P4	Below 1 Ω

FRONT WASHER SWITCH (for LHD)
Connector Condition	Tester Connection	Switch Condition	Specified Condition
Component without harness connected	I124-4 (EW) - I124-7 (WF)	ON	Below 1 Ω
	I125-5 (WR) - I125-10 (+B2)	ON	Below 1 Ω
	I124-4 (EW) - I124-7 (WF)	OFF	10 kΩ or higher
	I125-5 (WR) - I125-10 (+B2)	OFF	10 kΩ or higher

FRONT WASHER SWITCH (for RHD, for LH Side)
Connector Condition	Tester Connection	Switch Condition	Specified Condition
Component without harness connected	I29-7 (EW) - I29-4 (WF)	ON	Below 1 Ω
	I30-10 (WR) - I30-5 (+B2)	ON	Below 1 Ω
	I29-7 (EW) - I29-4 (WF)	OFF	10 kΩ or higher
	I30-10 (WR) - I30-5 (+B2)	OFF	10 kΩ or higher

FRONT WASHER SWITCH (for RHD, for RH Side)
Connector Condition	Tester Connection	Switch Condition	Specified Condition
Component without harness connected	I124-4 (EW) - I124-7 (WF)	ON	Below 1 Ω
	I125-5 (WR) - I125-10 (+B2)	ON	Below 1 Ω
	I124-4 (EW) - I124-7 (WF)	OFF	10 kΩ or higher
	I125-5 (WR) - I125-10 (+B2)	OFF	10 kΩ or higher

REAR WIPER SWITCH (for LHD)
Connector Condition	Tester Connection	Switch Condition	Specified Condition
Component without harness connected	I124-2 (C1R) - I124-4 (EW)	OFF	10 kΩ or higher
	I124-3 (+1R) - I124-4 (EW)	OFF	10 kΩ or higher
	I124-2 (C1R) - I124-4 (EW)	INT	Below 1 Ω
	I124-3 (+1R) - I124-4 (EW)	ON	Below 1 Ω

REAR WIPER SWITCH (for RHD, for LH Side)
Connector Condition	Tester Connection	Switch Condition	Specified Condition
Component without harness connected	I29-2 (C1R) - I29-7 (EW)	OFF	10 kΩ or higher
	I29-1 (+1R) - I29-7 (EW)	OFF	10 kΩ or higher
	I29-2 (C1R) - I29-7 (EW)	INT	Below 1 Ω
	I29-1 (+1R) - I29-7 (EW)	ON	Below 1 Ω

REAR WIPER SWITCH (for RHD, for RH Side)
Connector Condition	Tester Connection	Switch Condition	Specified Condition
Component without harness connected	I124-2 (C1R) - I124-4 (EW)	OFF	10 kΩ or higher
	I124-3 (+1R) - I124-4 (EW)	OFF	10 kΩ or higher
	I124-2 (C1R) - I124-4 (EW)	INT	Below 1 Ω
	I124-3 (+1R) - I124-4 (EW)	ON	Below 1 Ω

REAR WASHER SWITCH (for LHD)
Connector Condition	Tester Connection	Switch Condition	Specified Condition
Component without harness connected	I124-4 (EW) - I125-5 (WR)	ON	Below 1 Ω
	I124-7 (WF) - I125-10 (+B2)	ON	Below 1 Ω
	I124-4 (EW) - I125-5 (WR)	OFF	10 kΩ or higher
	I124-7 (WF) - I125-10 (+B2)	OFF	10 kΩ or higher

REAR WASHER SWITCH (for RHD, for LH Side)
Connector Condition	Tester Connection	Switch Condition	Specified Condition
Component without harness connected	I29-7 (EW) - I30-10 (WR)	ON	Below 1 Ω
	I29-4 (WF) - I30-5 (+B2)	ON	Below 1 Ω
	I29-7 (EW) - I30-10 (WR)	OFF	10 kΩ or higher
	I29-4 (WF) - I30-5 (+B2)	OFF	10 kΩ or higher

REAR WASHER SWITCH (for RHD, for RH Side)
Connector Condition	Tester Connection	Switch Condition	Specified Condition
Component without harness connected	I124-4 (EW) - I125-5 (WR)	ON	Below 1 Ω
	I124-7 (WF) - I125-10 (+B2)	ON	Below 1 Ω
	I124-4 (EW) - I125-5 (WR)	OFF	10 kΩ or higher
	I124-7 (WF) - I125-10 (+B2)	OFF	10 kΩ or higher

LEVEL WARNING SWITCH
Connector Condition	Tester Connection	Condition	Specified Condition
Component without harness connected	1 (S) - 2 (E)	Fluid volume is 600 to 800 cc (36.6 to 48.8 cu.in.) or more*	10 kΩ or higher
Component without harness connected	1 (S) - 2 (E)	Fluid volume is 600 to 800 cc (36.6 to 48.8 cu.in.) or less*	Below 1 Ω

RELAY (w/ Headlight Cleaner System)
Connector Condition	Tester Connection	Condition	Specified Condition
-	3 - 5	Battery voltage not applied to terminals 1 and 2	10 kΩ or higher
-	3 - 5	Battery voltage applied to terminals 1 and 2	Below 1 Ω