FUEL PUMP(w/ Canister Pump Module) REASSEMBLY

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL FUEL PUMP ASSEMBLY WITH FILTER

   Tech Tips

   Perform "Inspection After Repairs" after replacing the fuel pump.

   Click here

   
   
   1. 

      *1	Fuel Pump Spacer
      *2	O-Ring

      Apply gasoline to a new O-ring. Then install the fuel pump spacer and O-ring to the fuel pump assembly with filter.

   2. Connect the fuel pump harness connector.

   3. Attach the 5 claws of the fuel filter assembly and install the fuel pump assembly with filter.

2. INSTALL NO. 1 FUEL SUCTION SUPPORT

   
   

   1. Attach the 2 claws and install the No. 1 fuel suction support to the fuel filter assembly.

3. INSTALL NO. 1 FUEL SUB-TANK

   
   

   1. Apply gasoline to a new O-ring and install it to the jet pump.

   2. 

      Install the jet pump while aligning it to the installation position of the No. 1 fuel sub-tank.

   3. Attach the claw to install the jet pump nozzle.

   4. Push the 2 claws into the holes and install the No. 1 fuel sub-tank to the fuel filter assembly.

   5. 

      Connect the fuel pump harness connector.

   6. Install the No. 2 fuel tank cushion and No. 3 fuel tank cushion to the fuel suction plate sub-assembly, then install them to the No. 1 fuel sub-tank.

   7. Install a new fuel tank pipe setting holder.

      Tech Tips

      Slightly lower the fuel suction plate sub-assembly to install the fuel tank pipe setting holder.