FRONT CRANKSHAFT OIL SEAL INSTALLATION

PROCEDURE


  1. INSTALL TIMING CHAIN COVER OIL SEAL


    1. Apply MP grease to the lip of a new timing chain cover oil seal.

      Note


      • Do not allow foreign matter to contact the lip of the timing chain cover oil seal.

      • Do not allow MP grease to contact the dust seal.

    2. A0001A7C01
      *a -0.75 to -1.45 mm (-0.0295 to -0.0571 in.) (from edge of the timing chain cover assembly)

      Using SST and a hammer, tap in the timing chain cover oil seal until the timing chain cover edge.

      SST
      09636-20010
      Standard
      -0.75 to -1.45 mm (-0.0295 to -0.0571 in.) (from edge of the timing chain cover assembly)

      Note


      • Keep the lip of the timing chain cover oil seal free from foreign matter.

      • Do not tap in the timing chain cover oil seal at an angle.

  2. INSTALL CRANKSHAFT PULLEY ASSEMBLY

    Click here

  3. INSTALL FRONT SUSPENSION MEMBER REINFORCEMENT RH

    Click here

  4. INSTALL FAN AND GENERATOR V BELT

    Click here

  5. INSPECT FOR OIL LEAK

    Click here

  6. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here