BATTERY COOLING FILTER REMOVAL

PROCEDURE


  1. REMOVE REAR SEAT CUSHION ASSEMBLY

    for Manual seat: Click here

    for Power seat: Click here

  2. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

  3. REMOVE REAR DOOR SCUFF PLATE RH

    Click here

  4. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH (for Manual Seat)

    Click here

  5. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH (for Manual Seat)

    Click here

  6. REMOVE NO. 3 BATTERY SERVICE COVER BOARD

    Tech Tips

    If the message "Cooling Performance of The Hybrid Battery Is Low Visit Your Dealer" is displayed on the multi-information display in the combination meter assembly, inspect the No. 3 battery service cover board after removing it.

    A01O96O

    Click here


    1. B002K8KC01
      *a for Manual Seat
      *b for Power Seat

      Remove the 2 clips.

    2. Detach the 2 claws and remove the No. 3 battery service cover board.

    3. B002L1D

      for Power Seat:

      Disconnect the wire harness clamp and power seat switch connector.

  7. REMOVE NO. 2 BATTERY SERVICE COVER BOARD

    Tech Tips

    Use the same procedure as for the No. 2 battery service cover board.