DRIVE BELT ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT FAN AND GENERATOR V BELT


    1. A01CQ1C

      Check the fan and generator V belt for wear, cracks or other signs of damage.

      If any of the following defects is found, replace the fan and generator V belt.


      • The fan and generator V belt is cracked.

      • The fan and generator V belt is worn out to the extent that the cords are exposed.

      • The fan and generator V belt has chunks missing from the ribs.

    2. A01CNXQC03
      *a CORRECT
      *b INCORRECT

      Check that the fan and generator V belt fits properly in the ribbed grooves.

      Tech Tips

      Check with your hand to confirm that the belt has not slipped out of the grooves on the bottom of the pulley. If it has slipped out, replace the fan and generator V belt. Install a new fan and generator V belt correctly.

  2. INSPECT V-RIBBED BELT TENSIONER ASSEMBLY


    1. Check that nothing gets caught in the tensioner by turning it clockwise and counterclockwise.

      If a malfunction exists, replace the V-ribbed belt tensioner assembly.