PROCEDURE
INSTALL BATTERY COOLING BLOWER ASSEMBLY LH
CAUTION:
Wear insulated gloves and use insulated tools.
Install the battery cooling blower assembly LH with the 3 nuts.
Connect the wire harness clamp and connector.
INSTALL BATTERY COOLING BLOWER ASSEMBLY RH
CAUTION:
Wear insulated gloves and use insulated tools.
Install the battery cooling blower assembly RH with the 3 nuts.
Connect the wire harness clamp and connector.
INSTALL NO. 4 HYBRID BATTERY EXHAUST DUCT
Install the No. 4 hybrid battery exhaust duct to the No. 2 hybrid battery exhaust duct.
INSTALL NO. 3 HYBRID BATTERY EXHAUST DUCT
Install the No. 3 hybrid battery exhaust duct to the No. 1 hybrid battery exhaust duct.
CONNECT NO. 2 HYBRID BATTERY INTAKE DUCT
CAUTION:
Wear insulated gloves.
Connect the No. 2 hybrid battery intake duct with the 2 clips.
CONNECT NO. 1 HYBRID BATTERY INTAKE DUCT
CAUTION:
Wear insulated gloves.
Connect the No. 1 hybrid battery intake duct with the 2 clips.
INSTALL NO. 2 TOOL BOX SUB-ASSEMBLY
w/o Spare Tire: Click here
w/ Spare Tire: Click here
INSTALL NO. 1 TOOL BOX SUB-ASSEMBLY
w/o Spare Tire: Click here
w/ Spare Tire: Click here
INSTALL DECK FLOOR BOX RH
w/o Spare Tire: Click here
w/ Spare Tire: Click here
INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY
INSTALL REAR DECK FLOOR BOX (w/ Spare Tire)
INSTALL SEATBACK ASSEMBLY RH
for Manual Seat: Click here
for Power Seat: Click here
INSTALL NO. 1 INVERTER RESERVE TANK BRACKET (for 2WD)
CONNECT INVERTER RESERVE TANK ASSEMBLY
CONNECT WIRE HARNESS
INSTALL SERVICE PLUG GRIP
INSTALL HYBRID BATTERY SERVICE PLUG COVER
INSTALL BATTERY SERVICE HOLE COVER
CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
INSTALL DECK FLOOR BOX LH
w/o Spare Tire: Click here
w/ Spare Tire: Click here
INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY
INSTALL DECK BOARD ASSEMBLY
INSTALL TONNEAU COVER ASSEMBLY