SERVICE PLUG GRIP INSTALLATION

PROCEDURE


  1. INSTALL SERVICE PLUG GRIP

    CAUTION:

    Wear insulating gloves.

    Note

    Before connecting the service plug, check that no parts and tools remain and that the high voltage terminals and connectors are connected securely.


    1. Wear insulated gloves and install the service plug grip in the order shown in the illustration.

      B002HWIC02
      *1 Service Plug Grip Lever - -

      1. Insert the service plug grip straight.

      2. Push down the lever 90°.

      3. B002K6ZC07
        *1 Service Plug Grip

        Slide the lever until it clicks to indicate that it is locked.

        Note

        Slide firmly to the left until the UNLOCK indication is hidden.

    2. Rotate the handle of the service plug grip 90° toward the battery and slide it in the direction shown by the arrow until a "click" sound is heard.

  2. INSTALL HYBRID BATTERY SERVICE PLUG COVER

    CAUTION:

    Wear insulated gloves and use insulated tools.


    1. B002IUC

      Using an insulated tool, install the hybrid battery service plug cover with the 2 nuts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

  3. INSTALL BATTERY SERVICE HOLE COVER

    B002K82

    1. Attach the 4 claws and install the battery service hole cover.

  4. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL


    1. Connect the cable to the negative (-) auxiliary battery terminal and tighten the nut.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    2. w/o Spare Tire:

      Install the battery service cover and attach the 2 claws.

  5. INSTALL DECK FLOOR BOX LH (w/ Spare Tire)

    Click here

  6. INSTALL REAR DECK FLOOR BOX (w/ Spare Tire)

    Click here

  7. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Spare Tire)

    Click here