ACCELERATOR PEDAL SENSOR ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on(IG).

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / Hybrid Control / Data List / Accel Pedal Pos #1, Accel Pedal Pos #2.


      Powertrain > Hybrid Control > Data List
      Tester Display
      Accel Pedal Pos #1
      Accel Pedal Pos #2

    5. Operate the accelerator pedal sensor assembly and check that the "Accel Pedal Pos #1, Accel Pedal Pos #2" values are within the specification.

      Standard (Accel Pedal Pos #1)
      Accelerator Pedal Condition Specified Condition
      Released 10 to 22%
      Depressed 52 to 90%
      Standard (Accel Pedal Pos #2)
      Accelerator Pedal Condition Specified Condition
      Released 24 to 40%
      Depressed 68 to 95%

      If the result is not as specified, check the accelerator pedal sensor assembly, wire harness or ECM.