SUB RADIATOR INSTALLATION

PROCEDURE


  1. INSTALL RADIATOR ASSEMBLY (for Inverter Coolant)


    1. A01O8NWC02
      *a Matchmark
      *b Positioning Rib
      *c 135°
      *d 45°
      *e Top
      *f Front of the Vehicle

      Install the radiator assembly (for inverter coolant) to the cooler condenser assembly with the 4 bolts.

      Torque:
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

    2. Referring to the illustration, connect the No. 5 inverter cooling hose, No. 2 inverter cooling hose assembly and clamp to the radiator assembly (for inverter coolant), and secure with the hose clamp.

      Note


      • Until immediately before connecting the water hose, plug the water hose and pipe with vinyl tape, etc. to prevent foreign matter from entering the cooling path.

      • Insert the water hose up to the tank surface of the radiator assembly (for inverter coolant).

      • Align the matchmark on the water hose with the positioning rib on the radiator assembly (for inverter coolant).

  2. INSTALL NO. 2 FAN SHROUD

    Click here

  3. INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY

    Click here

  4. ADD COOLANT (for Inverter Coolant)

    Click here

  5. INSPECT FOR COOLANT LEAK (for Inverter Coolant)

    Click here

  6. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here