SUB RADIATOR REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

  2. DRAIN COOLANT (for Inverter Coolant)

    Click here

  3. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY

    Click here

  4. REMOVE NO. 2 FAN SHROUD

    Click here

  5. REMOVE RADIATOR ASSEMBLY (for Inverter Coolant)


    1. A01H6TN

      Slide the hose clamp, and disconnect the No. 5 inverter cooling hose and No. 2 inverter cooling hose assembly from the radiator assembly (for inverter coolant).

      Note


      • After disconnecting the water hose, plug the water hose and the pipe of the radiator assembly (for inverter coolant) with vinyl tape, etc. to prevent foreign matter from entering the cooling path.

      • Do not apply excessive force to the water hose.

      Tech Tips

      Prepare a drain pan or cloth in case the coolant leaks.

    2. Remove the 4 bolts and radiator assembly (for inverter coolant) from the cooler condenser assembly.