TCM СНЯТИЕ

CAUTION / NOTICE / HINT

Note

If automatic transaxle parts are replaced, refer to Parts Replacement Compensation Table to determine if any additional operations are necessary.

Click here

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE RADIATOR SIDE DEFLECTOR SEAL LH

    Click here

  4. REMOVE RADIATOR SIDE SEAL RH

    Click here

  5. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  6. REMOVE INLET AIR CLEANER ASSEMBLY

    Click here

  7. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

    Click here

  8. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

    Click here

  9. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  10. REMOVE TCM


    1. A00274J

      Turn the lock lever and disconnect the TCM connector.

    2. A00280F

      Remove the 2 bolts and TCM from the automatic transaxle assembly.