ВОЗДУШНО-МАСЛЯНЫЙ РАДИАТОР УСТАНОВКА

PROCEDURE


  1. INSTALL OIL COOLER BRACKET

    Tech Tips

    Perform this procedure only when replacement of the oil cooler bracket is necessary.


    1. Temporarily install the oil cooler bracket to the body with the bolt.

    2. A002C01N01

      Install the nut and bolt in the order shown in the illustration.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

  2. INSTALL OIL COOLER ASSEMBLY


    1. Install the oil cooler assembly to the oil cooler bracket with the 2 nuts.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

    2. Connect the No. 1 oil cooler outlet hose and No. 3 transmission oil cooler hose to the oil cooler assembly and slide the 2 clips to secure them.

  3. INSTALL TRANSMISSION OIL COOLER AIR DUCT


    1. A002C51

      Install the transmission oil cooler air duct to the oil cooler assembly with the 2 bolts.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

      Tech Tips

      Insert the protrusion on the underside of the transmission oil cooler air duct into the bracket hole on the underside of the oil cooler assembly.

  4. ADD AUTOMATIC TRANSAXLE FLUID

    Click here

  5. INSTALL FRONT FENDER APRON SEAL LH

    Click here

  6. INSTALL FRONT FENDER LINER LH

    Click here

  7. INSTALL NO. 1 ENGINE UNDER COVER

    Click here