QUARTER PANEL WHEEL OPENING MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. DISCONNECT QUARTER PANEL WHEEL OPENING MOULDING


    1. A01QV3Y

      Remove the screw.

    2. Remove the 2 clips.

    3. A01QV0C

      Disengage the 4 clips and disconnect the quarter panel wheel opening moulding.

  2. REMOVE NO. 2 QUARTER PANEL SEAL

    Tech Tips

    When removing the No. 2 quarter panel seal, heat the vehicle body and No. 2 quarter panel seal using a heat light.

    Heating Temperature
    Item Temperature
    Vehicle Body 40 to 60°C (104 to 140°F)
    No. 2 Quarter Panel Seal 20 to 30°C (68 to 86°F)

    Note

    Do not heat the vehicle body or No. 2 quarter panel seal excessively.


    1. A01QW3QC01
      B004057 Double-sided Tape

      Remove the 4 screws.

    2. Remove the grommet.

    3. Separate the double-sided tape to remove the No. 2 quarter panel seal.