REAR DOOR WINDOW FRAME MOULDING REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE REAR DOOR BELT MOULDING ASSEMBLY

   Click here

2. DISCONNECT REAR DOOR WEATHERSTRIP

   
   

   1. 

      Disengage the 2 clips and disconnect the rear door weatherstrip.

3. REMOVE REAR DOOR FRONT WINDOW FRAME MOULDING

   Tech Tips

   When removing the rear door front window frame moulding, heat the vehicle body and rear door front window frame moulding using a heat light.

   Heating Temperature

   Item	Temperature
   Vehicle Body	40 to 60°C (104 to 140°F)
   Rear Door Front Window Frame Moulding	20 to 30°C (68 to 86°F)

   Note

   Do not heat the vehicle body or rear door front window frame moulding excessively.

   
   

   1. Using a heat light, heat the rear door front window frame moulding.

   2. 

      *a	Double-sided Tape
      *b	Caulking Sponge

      Using a moulding remover, disengage the clip and guide, and separate the double-sided tape and caulking sponge to remove the rear door front window frame moulding.

4. REMOVE REAR DOOR REAR WINDOW FRAME MOULDING

   Tech Tips

   When removing the rear door rear window frame moulding, heat the vehicle body and rear door rear window frame moulding using a heat light.

   Heating Temperature

   Item	Temperature
   Vehicle Body	40 to 60°C (104 to 140°F)
   Rear Door Rear Window Frame Moulding	20 to 30°C (68 to 86°F)

   Note

   Do not heat the vehicle body or rear door rear window frame moulding excessively.

   
   

   1. Using a heat light, heat the rear door rear window frame moulding.

   2. 

      *a	Double-sided Tape

      Using a moulding remover, disengage the 3 clips and separate the double-sided tape to remove the rear door rear window frame moulding.

5. REMOVE REAR DOOR UPPER WINDOW FRAME MOULDING

   
   

   1. Insert a 4.0 mm (0.157 in.) drill bit into a drill.

   2. Tape the 4.0 mm (0.157 in.) drill bit 5.0 mm (0.197 in.) from the tip as shown in the illustration.

      

      Reference Measurement
      Area Measurement Area Measurement A 5.0 mm (0.197 in.) - -

      Note

      Tape the 4.0 mm (0.157 in.) drill bit to prevent the drill bit from going too deep.

   3. Lightly press the drill bit against the rivets to drill off the rivet flanges, and remove the 5 rivets.

      Note

      
      

      • Pressing the drill too firmly will cause the rivet to turn and result in the rivet not being drilled through.

      • Prying the rivets with the drill may damage the rivet installation holes or drill bit.

      • Be careful of the drilled rivets, as they may be hot.

   4. Using a vacuum cleaner, remove the rivet fragments and shavings from the drilled areas.

   5. Disengage the guide to remove the rear door upper window frame moulding.

6. REMOVE REAR DOOR REAR UPPER OUTSIDE MOULDING

   
   

   1. Insert a 4.0 mm (0.157 in.) drill bit into a drill.

   2. Tape the 4.0 mm (0.157 in.) drill bit 5.0 mm (0.197 in.) from the tip as shown in the illustration.

      

      Reference Measurement
      Area Measurement Area Measurement A 5.0 mm (0.197 in.) - -

      Note

      Tape the 4.0 mm (0.157 in.) drill bit to prevent the drill bit from going too deep.

   3. Lightly press the drill bit against the rivets to drill off the rivet flanges, and remove the 3 rivets and rear door rear upper outside moulding.

      Note

      
      

      • Pressing the drill too firmly will cause the rivet to turn and result in the rivet not being drilled through.

      • Prying the rivets with the drill may damage the rivet installation holes or drill bit.

      • Be careful of the drilled rivets, as they may be hot.

   4. Using a vacuum cleaner, remove the rivet fragments and shavings from the drilled areas.