FRONT DOOR BELT MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE OUTER REAR VIEW MIRROR WITH COVER

    Click here

  2. REMOVE FRONT DOOR SERVICE HOLE COVER

    Click here

  3. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY

    Click here

  4. REMOVE FRONT DOOR BELT MOULDING ASSEMBLY


    1. A01QVPWC01
      B004057 Protective Tape

      Apply protective tape around the front door belt moulding assembly.

    2. A01QVTBC01
      *a Protective Tape

      Disengage the claw (A).

    3. Using a screwdriver with its tip wrapped with protective tape, disengage the 5 claws (B) as shown in the illustration.

    4. Disengage the guide and remove the front door belt moulding assembly.