NAME PLATE INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

When installing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.

Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Name Plate or Emblem 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body, name plates or emblem excessively.

PROCEDURE


  1. INSTALL NO. 4 LUGGAGE COMPARTMENT DOOR PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new No. 4 luggage compartment door plate.


      1. Using a heat light, heat the vehicle body and No. 4 luggage compartment door plate.

      2. Remove the release paper from the No. 4 luggage compartment door plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 4 luggage compartment door plate as shown in the illustration.

        A018KVCC01
        *a Edge of Curved Surface *b Profile of Back Door Panel
        Standard Measurement
        Area Measurement Area Measurement
        A 60 mm (2.36 in.) B 123 mm (4.84 in.)
        C 54 mm (2.13 in.) D 47 mm (1.85 in.)

  2. INSTALL NO. 4 BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new No. 4 back door name plate.


      1. Using a heat light, heat the vehicle body and No. 4 back door name plate.

      2. Remove the release paper from the No. 4 back door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 4 back door name plate as shown in the illustration.

        A018M3ZC01
        *a Edge of Curved Surface *b Profile of Back Door Panel
        Standard Measurement
        Area Measurement Area Measurement
        A 36 mm (1.42 in.) B 38 mm (1.50 in.)
        C 122 mm (4.80 in.) D 33 mm (1.30 in.)

  3. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new No. 2 luggage compartment door name plate.


      1. Using a heat light, heat the vehicle body and No. 2 luggage compartment door name plate.

      2. Remove the release paper from the No. 2 luggage compartment door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 2 luggage compartment door name plate as shown in the illustration.

        for HIGHLANDER Plate:

        A018HLNC01
        *a Edge of Curved Surface *b Profile of Back Door Panel
        Standard Measurement
        Area Measurement Area Measurement
        A 299 mm (11.8 in.) B 35 mm (1.38 in.)
        C 62 mm (2.44 in.) - -

        for KLUGER Plate:

        A018INYC01
        *a Edge of Curved Surface *b Profile of Back Door Panel
        Standard Measurement
        Area Measurement Area Measurement
        A 197 mm (7.76 in.) B 35 mm (1.38 in.)
        C 60 mm (2.36 in.) - -

  4. INSTALL NO. 1 BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new No. 1 back door name plate.


      1. Using a heat light, heat the vehicle body and No. 1 back door name plate.

      2. Remove the release paper from the No. 1 back door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 1 back door name plate as shown in the illustration.

        A018K5BC01
        *a Edge of Curved Surface *b Profile of Back Door Panel
        Standard Measurement
        Area Measurement Area Measurement
        A 29 mm (1.14 in.) B 37 mm (1.46 in.)
        C 35 mm (1.38 in.) - -

  5. INSTALL SYMBOL EMBLEM

    Click here