REAR SPOILER REASSEMBLY

PROCEDURE


  1. INSTALL REAR SPOILER COVER LH


    1. Engage the 3 claws to install the rear spoiler cover LH.

  2. INSTALL REAR SPOILER COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  3. INSTALL NO. 3 REAR SPOILER PROTECTOR


    1. Clean off any tape adhesive residue with cleaner.

    2. Remove the release paper from a new No. 3 rear spoiler protector.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. A018MFOC01
      *a Line

      Install the No. 3 rear spoiler protector as shown in the illustration.

      Tech Tips


      • Apply the No. 3 rear spoiler protector along the line marked on the rear spoiler.

      • Use the same procedure for the RH side and LH side.

  4. INSTALL NO. 2 REAR SPOILER PROTECTOR


    1. Clean off any tape adhesive residue with cleaner.

    2. Remove the release paper from a new No. 2 rear spoiler protector.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. A018KWVC01
      *a Line

      Install the No. 2 rear spoiler protector as shown in the illustration.

      Tech Tips


      • Apply the No. 2 rear spoiler protector along the line marked on the rear spoiler.

      • Use the same procedure for the RH side and LH side.

  5. INSTALL NO. 1 REAR SPOILER PROTECTOR


    1. Clean off any tape adhesive residue with cleaner.

    2. Remove the release paper from 3 new No. 1 rear spoiler protectors.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Install the 3 No. 1 rear spoiler protectors as shown in the illustration.

      A018IG3C01
      *a Line - -

      Tech Tips

      Apply the No. 1 rear spoiler protector along the line marked on the rear spoiler.

  6. INSTALL REAR WASHER NOZZLE

    Click here

  7. INSTALL CENTER STOP LIGHT ASSEMBLY

    Click here