REAR BUMPER INSTALLATION

PROCEDURE

1. INSTALL REAR BUMPER ASSEMBLY

   
   

   1. w/ TOYOTA Parking Assist-sensor System:

      
      

      1. Connect the connector.

   2. w/ Rear Fog Light:

      
      

      1. Connect the connector.

   3. 

      Move the rear bumper assembly into position.

   4. 

      Engage the 7 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

   5. Install the 6 clips.

   6. Install the rear bumper assembly with the 4 screws.

2. CONNECT QUARTER PANEL WHEEL OPENING MOULDING LH

   
   

   1. 

      Engage the 2 clips.

   2. Engage the 4 claws.

   3. Install the 2 clips.

   4. w/o Mudguard:

      
      

      1. Connect the quarter panel wheel opening moulding LH with the 3 screws.

   5. w/ Mudguard:

      
      

      1. Connect the quarter panel wheel opening moulding LH with the 2 screws.

3. CONNECT QUARTER PANEL WHEEL OPENING MOULDING RH

   Tech Tips

   Use the same procedure as for the LH side.

4. INSTALL REAR QUARTER PANEL MUDGUARD LH (w/ Mudguard)

   Click here

5. INSTALL REAR QUARTER PANEL MUDGUARD RH (w/ Mudguard)

   Tech Tips

   Use the same procedure as for the LH side.