FRONT BUMPER REASSEMBLY

PROCEDURE


  1. INSTALL FRONT BUMPER STAY LH


    1. A018IWU

      Engage the claw.

    2. Engage the clip as shown in the illustration.

    3. A018KMN

      Install the front bumper stay LH with the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  2. INSTALL FRONT BUMPER STAY RH

    Tech Tips

    Use the same procedure as for the LH side.

  3. INSTALL FRONT BUMPER REINFORCEMENT


    1. A018JK3

      Install the front bumper reinforcement with the 6 bolts.

      Torque:
      69 N*m  { 704 kgf*cm, 51 ft.*lbf }
    2. A018LRW

      Engage the 2 clamps.

  4. INSTALL FRONT BUMPER ENERGY ABSORBER

    A018LRH

    1. Engage the 2 guides to install the front bumper energy absorber.

  5. INSTALL NO. 1 MOULDING TAPE


    1. Clean off any tape adhesive residue with cleaner.

    2. Using a brush or sponge, coat the application area of No. 1 moulding tape with primer.

      Note


      • Do not apply too much primer.

      • Allow the primer to dry for 3 minutes or more.

      • Throw away any leftover primer.

      Tech Tips

      If an area other than specified is coated by accident, wipe off the primer with a clean piece of cloth before it dries.

    3. Remove the release paper from a new No. 1 moulding tape.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. A018M3BC01
      *a Line

      Install the No. 1 moulding tape as shown in the illustration.

      Tech Tips


      • Apply the No. 1 moulding tape along the line marked on the front bumper cover.

      • Use the same procedure for the RH side and LH side.

  6. INSTALL LOWER FRONT BUMPER COVER


    1. Engage the 18 claws.

      A018HVX
    2. A018H7D

      Install the lower front bumper cover with the 6 clips.

  7. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET


    1. A018HOA

      Engage the 2 claws.

    2. Install the front bumper extension mounting bracket with the 2 screws.

  8. INSTALL LOWER RADIATOR GRILLE SUB-ASSEMBLY


    1. Engage the 2 guides and 10 claws.

      A018IZZ
    2. A018K6U

      Install the lower radiator grille sub-assembly with the 2 clips.

  9. INSTALL FRONT BUMPER HOLE COVER LH


    1. A018JHLC01
      *a Hook

      Engage the hook.

    2. Engage the 2 claws to install the front bumper hole cover LH.

  10. INSTALL FRONT BUMPER HOLE COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  11. INSTALL FRONT BUMPER SIDE RETAINER LH


    1. A018KMD

      Engage the 3 claws.

    2. A018LVC

      Install the clip.

    3. Install the front bumper side retainer LH with the screw.

  12. INSTALL FRONT BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.

  13. INSTALL FRONT FENDER LINER RETAINER


    1. A018JU0

      Engage the claw to install the front fender liner retainer.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  14. INSTALL FOG LIGHT COVER LH


    1. A018JPN

      Engage the guide and 2 claws.

    2. A018I0T

      Install the fog light cover LH with the clip.

  15. INSTALL FOG LIGHT COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  16. INSTALL DAYTIME RUNNING LIGHT ASSEMBLY LH

    Click here

  17. INSTALL DAYTIME RUNNING LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  18. INSTALL FOG LIGHT ASSEMBLY LH

    Click here

  19. INSTALL FOG LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  20. INSTALL NO. 1 HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)


    1. Engage the 8 clamps to install the headlight cleaner hose.

      A018KD5

  21. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)

    Click here

  22. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure for the LH side.

  23. INSTALL HEADLIGHT CLEANER WASHER NOZZLE COVER LH (w/ Headlight Cleaner System)

    Click here

  24. INSTALL HEADLIGHT CLEANER WASHER NOZZLE COVER RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure for the LH side.