HEIGHT CONTROL SENSOR INSTALLATION

PROCEDURE

1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH

   
   

   1. Engage the guide.

   2. Install the bolt and 2 nuts.

      Torque:

      Bolt

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Nut

      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

   3. Engage the guide.

   4. Install the rear height control sensor sub-assembly LH with the bolt.

      Torque:

      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

   5. Connect the connector.

2. INSTALL REAR WHEEL LH

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

4. INITIALIZE HEIGHT CONTROL SENSOR SIGNAL

   Click here

5. ADJUST HEADLIGHT AIMING

   Click here