REAR LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL REAR LIGHT ASSEMBLY

   
   

   1. Engage the pin.

   2. Install the rear light assembly with the 3 nuts.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

   3. Connect the 2 connectors.

2. INSTALL POWER BACK DOOR SENSOR ASSEMBLY (w/ Power Back Door)

   Click here

3. INSTALL BACK DOOR TRIM PANEL ASSEMBLY

   Click here

4. INSTALL NO. 2 BACK DOOR SERVICE HOLE COVER

   Click here

5. INSTALL NO. 1 BACK DOOR SERVICE HOLE COVER

   Click here

6. INSTALL BACK DOOR LOCK COVER (for Glass Hatch Type)

   Click here

7. INSTALL BACK DOOR TRIM COVER LH

   Click here

8. INSTALL BACK DOOR TRIM COVER RH

   Tech Tips

   Use the same procedure as for the LH side.

9. INSTALL BACK WINDOW UPPER TRIM PANEL

   Click here