REAR COMBINATION LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE REAR COMBINATION LIGHT ASSEMBLY


    1. A01QVSMC01
      *a Pin
      *b Guide

      Remove the 2 screws.

    2. Disengage the pin and guide, and disconnect the rear combination light assembly as shown in the illustration.

    3. A01QW7T

      Disengage the 3 clamps.

    4. Turn the rear combination light socket and wire sub-assembly with the tail and stop light bulb as shown in the illustration to disconnect them as a unit.

    5. A01QWT8

      Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb as shown in the illustration to remove the rear combination light assembly.

  2. REMOVE TAIL AND STOP LIGHT BULB


    1. Remove the tail and stop light bulb from the rear combination light socket and wire sub-assembly.

  3. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly.

  4. REMOVE DECK BOARD ASSEMBLY

    Click here

  5. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY

    Click here

  6. REMOVE TONNEAU COVER ASSEMBLY

    Click here

  7. REMOVE DECK SIDE TRIM BOX LH

    Click here

  8. REMOVE REAR DECK FLOOR BOX

    Click here

  9. REMOVE REAR FLOOR FINISH PLATE

    Click here

  10. REMOVE REAR NO. 2 SEAT ASSEMBLY

    Click here

  11. REMOVE REAR OUTER SEAT TRACK BRACKET COVER

    Click here

  12. REMOVE REAR DOOR SCUFF PLATE

    Click here

  13. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP


    1. Disconnect the rear door opening trim weatherstrip.

  14. REMOVE FRONT DECK SIDE TRIM COVER

    Click here

  15. DISCONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY

    Click here

  16. REMOVE NO. 2 DECK SIDE TRIM COVER (for LH Side)

    Click here

  17. REMOVE NO. 1 DECK SIDE TRIM COVER (for RH Side)

    Click here

  18. REMOVE DECK TRIM SIDE SERVICE HOLE COVER (for LH Side)

    Click here

  19. REMOVE DECK TRIM SIDE BELT HOLE COVER RH (for RH Side)

    Click here

  20. DISCONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY

    Click here

  21. REMOVE SIDE TRIM COVER RH (for RH Side)

    w/o Rear Automatic Air Conditioning System: Click here

  22. REMOVE COOLER (NO. 2 ROOM TEMP. SENSOR) THERMISTOR (for RH Side)

    w/ Rear Automatic Air Conditioning System: Click here

  23. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (for RH Side)

    Click here

  24. REMOVE DECK TRIM POCKET COVER

    Click here

  25. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

  26. REMOVE ROPE HOOK

    Click here

  27. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side)

    Click here

  28. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side)

    Click here

  29. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. A01QUYS

      Disconnect the connector.

    2. Disengage the grommet to remove the rear combination light socket and wire sub-assembly.