DAYTIME RUNNING LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT DAYTIME RUNNING LIGHT ASSEMBLY LH


    1. A018LU0C03
      *a

      Component without harness connected

      (Daytime Running Light Assembly LH)

      Apply battery voltage to the daytime running light assembly LH and check that the light comes on.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal 1 (E)

      Battery negative (-) → Terminal 2 (B)

      		 Daytime running light LH comes on

      If the result is not specified, replace the daytime running light assembly LH.

  2. INSPECT DAYTIME RUNNING LIGHT ASSEMBLY RH


    1. A018LU0C03
      *a

      Component without harness connected

      (Daytime Running Light Assembly RH)

      Apply battery voltage to the daytime running light assembly RH and check that the light comes on.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal 1 (E)

      Battery negative (-) → Terminal 2 (B)

      		 Daytime running light RH comes on

      If the result is not specified, replace the daytime running light assembly RH.