HEADLIGHT ASSEMBLY DISASSEMBLY

PROCEDURE


  1. REMOVE NO. 1 HEADLIGHT BULB


    1. A00272J

      Turn the back cover assembly as shown in the illustration to remove it.

    2. A0027HM

      Disconnect the connector.

    3. A002A02

      Turn the No. 1 headlight bulb as shown in the illustration to remove it.

      Note

      Do not touch the bulb glass.

  2. REMOVE NO. 2 HEADLIGHT BULB


    1. A002BRR

      Turn the back cover assembly as shown in the illustration to remove it.

    2. A0028KL

      Disconnect the connector.

    3. A002AN0

      Turn the No. 2 headlight bulb as shown in the illustration to remove it.

      Note

      Do not touch the bulb glass.

  3. REMOVE FRONT TURN SIGNAL LIGHT BULB


    1. A002BL2

      Turn the headlight cord with the front turn signal light bulb as shown in the illustration to disconnect them as a unit.

    2. Remove the front turn signal light bulb from the headlight cord.

  4. REMOVE HEADLIGHT LEVELING MOTOR (w/ Headlight Leveling)


    1. A002BIN

      Disconnect the connector.

    2. A00299ZC01
      *a Aiming Screw

      Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (1) shown in the illustration.

      Tech Tips


      • Turn the aiming screw until the headlight leveling motor can be moved in the direction indicated by the arrow (2) shown in the illustration.

      • Make sure to remember the number of aiming screw rotations.

    3. Turn the headlight leveling motor in the direction indicated by the arrow (2) shown in the illustration to disengage the pin.

    4. A002ALBC01
      *a Aiming Screw

      Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (3) shown in the illustration to disengage the shaft.

      Tech Tips

      Make sure to remember the number of aiming screw rotations.

    5. Pull out the headlight leveling motor in the direction indicated by the arrow (4) shown in the illustration to remove it.