REAR COMBINATION LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH

    A0028IPC01
    *a

    Component without harness connected

    (Rear Combination Light Assembly LH)

    1. Apply battery voltage to the rear combination light assembly LH and check that the lights illuminate.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal 1

      Battery negative (-) → Terminal 5

      		 Stop light illuminates

      Battery positive (+) → Terminal 4

      Battery negative (-) → Terminal 5

      		 Taillight illuminates

      If the result is not as specified, replace the rear combination light assembly LH.

  2. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH

    A0028IPC01
    *a

    Component without harness connected

    (Rear Combination Light Assembly RH)

    1. Apply battery voltage to the rear combination light assembly RH and check that the lights illuminate.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal 1

      Battery negative (-) → Terminal 5

      		 Stop light illuminates

      Battery positive (+) → Terminal 4

      Battery negative (-) → Terminal 5

      		 Taillight illuminates

      If the result is not as specified, replace the rear combination light assembly RH.